Adjustable TV wall mount on the wall not only gives it a nice look, but also frees up space and prevents the TV from tipping over.

We recommend the Sanus VMPL50A-B1 Tilt Mount for its solid steel construction, simple tilt mechanism, leveling after installation and ample supply of included hardware. If you just need a simple, non-rotating bracket to hold your TV securely in place, we recommend this one.

Sanus VLF728-B2

We like the Sanus VLF728-B2 fully movable mount if you want more flexibility to point your TV to a specific seat or even to another room.

The Sanus VMPL50A-B1 accommodates a 32- to 85-inch TV and sits less than 2 inches from the wall. It can be tilted up or down to reduce screen glare and give you more room to work behind the TV when connecting cables. We like the audible click of the monitor brackets when the TV is properly hung on the wall plate, which makes for easy installation. The mount also has replacement screws in case you've misplaced it a bit. Likewise, you can hard-calibrate the grips that control the bevel stress, but in case you need more room, Sanus supplies a handy allen wrench for the gig. In addition, the VMPL50A-B1 is certified to support its claimed maximum weight of 150 pounds thanks to its UL approval.

UL-listed VLF728-B2

In case you need to decide to pull the TV off the wall and calculate it towards the seat, we recommend the Sanus VLF728-B2 (additionally sold as the Sanus BLF328-B1), which works with TVs from 42 to 90 inches. This mount has a wider range of side-to-side rotation than most and can lift the TV up to 28 inches from the wall. The weight of the TV is held in place by large arms. However, the mount has a profile of just over 2 inches when pushed back against the wall. The mount has a high-quality feel thanks to its smooth slide-out and swivel motion, and the settings, from tilt lock to screen alignment, are easy to use. This Sanus mount is huge, but since the TV mounts should be the wrong way directly into the wall studs, the VLF728-B2's 32 wide mounting rods consider more prominent adaptability with position. The UL-listed VLF728-B2 is priced in the mid-range for high-end full-motion mounts.

We like the Monoprice 5915 EZ Series Tilt TV Wall Mount if you want an inexpensive wall mount that still has forward tilt functionality and is UL approved. It is compatible with TVs from 32 to 70 inches and weighs 154 pounds. It doesn't offer a level change after loading and it can't rotate. However, it is reasonably priced and provides wall-mounted TV.

EchoGear EGLF2

We also like the EchoGear EGLF2 full-motion mount if the Sanus VLF728-B2 is too expensive for your budget. The EchoGear EGLF2 stood out from other competitors in its price range thanks to its long, 22-inch extension, smooth arm movements, and nice aesthetic touches (like the curved corners of the mounting bars), despite the fact that it doesn't measure up to the full-motion Sanus mount in any metric (except for its lower price). Similar to other inexpensive full-motion mounts we've seen, this UL-approved EchoGear mount typically costs between $100 and $120.

Everything We Recommend Why You Should Trust Us I've been writing outdoor and home reviews since 2007. My extensive knowledge of fasteners, materials and wall construction styles have helped me evaluate wall mounts after spending ten years in the construction industry as carpenter, foreman and construction manager on multi-millions dollar residential home renovations in the Boston area.

I consulted with Grant Clauser, Wirecutter's senior editor of audio/video and smart home coverage, to write this guide. Since 2000, Grant has been writing and reviewing home theater equipment. Completed THX Level II home theater design training.

Who Should Use It:

If your TV is on a stand or in an entertainment center, you may want to hang it on the wall. A wall-mounted TV takes up little space, looks elegant, provides flexibility in where to place it and, depending on the mount, allows you to easily move the screen around the room to reduce glare. The TV mount is much safer than holding the TV on a stand because it is also bolted to the wall. This is especially important if you have children at home.

The added security that a wall mount provides cannot be overstated

A lot of space is needed to place the TV on the stand. A lot of current TVs generally have split legs, so you really want a long surface to help them. After placing the TV on the stand, you can only move it from side to side or tilt it slightly, which requires lifting the weight of the TV or moving your feet along the surface of the stand. These actions could scratch or damage the TV or stand. If you are using a TV stand, there are anti-tip devices that should be used; however, these devices further limit the TV's movement.

The added security that a wall mount provides cannot be overstated. Ten children visit the emergency room every day as a result of a TV being knocked over, according to Safe Kids Worldwide, a non-profit organization that aims to reduce preventable injuries to children. A wall mounted TV is extremely safe when properly installed. Large lag screws are usually used to attach the bracket directly to the studs, and the TV is then bolted to the bracket, which is secured in the bracket. The vast majority of mounts we found have a weight rating that far exceeds the weight of a typical television.

How we selected and tested

You can find an assortment of tv wall mount styles – from basic mounts with a low estimated level without any changes to the placement of the tv in accordance with expensive, fully computerized motion mounts that can raise, lower or rotate the tv at the press of a button. We believe that a tilting wall mount or full motion manual mount is the best choice for most people.

TV Motion

The TV can move up and down a bit with the tilt bracket. Angled mounts offer various advantages over basic mounts. Most importantly, tilting can help reduce screen glare. Visibility can be reduced by natural light, but this effect can usually be mitigated with just a slight tilt up or down. With these brackets, you can mount the TV higher on the wall than with a flat bracket because they can tilt down. Another significant advantage is that the slope usually provides enough room to reach behind the TV for wiring. A typical flat mount requires handling the wiring before mounting the TV to the wall, which can make installation difficult.

Full-motion hand holds also have their advantages. These mounts have the ability to rotate the screen to either side and extend the TV from the wall by 15 to 30 inches.